|
LAYOUT & MEASURING
1) Walk area to be fenced in.
Check for pool equipment and utility lines.
2) You are ready to stake out the
fence. Hammer stakes into place of actual fence placement.
Use 72 ¾ " on center measurements if possible. If you cannot, don't worry!
We will custom build
those panels for you!
Now stake out your gate placement.
For example:
For Single Gates:
36" wide gate will give you a
center measurement of 38"
42" wide will give you 44"
48" wide will give you 50"
60" wide will give you 62"
72" wide will give you 74"
For Double Gates:
72" wide gate will give you a
center measurement of 73"
96" wide will give you 97"
ALWAYS DETERMINE GATE SWING.
MAKE SURE YOU HAVE CLEARANCE.
3) If there are grade changes,
indicate highs and lows.
4) Make a sketch of your layout,
and fax it in. We will give you a complete breakdown.
ALWAYS LEAVE STAKES IN FOR YOUR
INSTALLATION CREW.
LAYOUT & MEASURE FOR
CORE DRILL OR PLATE
MOUNT
1) Layout concrete or wood deck.
Always measure in 6" from the edge to center.
2) Make an X at the center of your
measurement. (marks to remain for installation crew)
3) Layout for the gate placement,
always allow for gate swing, and direction of swing.
4) Send us your drawings, and we
will custom build the fence to size.
ALWAYS LEAVE YOUR MARKS FOR THE
INSTALLATION CREW.
|
